Our "Premium Grade" turbine lubrication and cleaner is our lightest viscosity and is rated to meet H1 and 3H lubricant stardards." Our premium grade turbine lubrication is non-toxic and formulated in accordance with the criteria established by for H1 and 3H lubricants and the U.S. FDA Regulations 21 CFR 172.878 and 21 CFR 178.3620(a). Our premium grade has a viscosity at a very light 12.32 cST at 40°C for your PowerCarver, Powercrafter, Rotorazor or Turbocarver providing complete bearing lubricity for longer bearing and impeller life and achieving the highest rated RPM. It is safe for use in carving wooden bowls, gourds, wooden utensils or any other porous objects which are engraved with your PowerCarver, Powercrafter, Rotorazor, Turbocarver, NSK Presto or other air turbine power rotary tools. When lubricating a Turbocarver, insert the lubrication by squeezing the pinch valve with your fingers to open it and facing up. Insert the nozzle and apply 1 or 2 drops. With a bur inserted, rotate it several times in both directions to work the lubrication into the bearings. Apply air and point the pinch valve towards a paper towel. This will remove any excess lubrication. Check the towel for impeller debris and reapply 1 or 2 drops until no debris is seen on the towel.
Premium grade turbine lubrication is for use in air turbine tools. Used for maintaining maximum bearing life. This premium grade bottle of turbine lubrication contains 1.25 floz and is non-toxic, colorless, odorless, and tasteless. Meets US Pharmacopeia (UPS), National Formulary (NF), US Food and Drug Administration (FDA) standards. Comes with a convenient dispensing cap.
Warning: Do not use with Vortex F5 or carvers with permanently lubricated bearings.